BRM ELECTRONIC PRESENTED THEIR NEW PRODUCTS IN EURASIA LIFT FAIR,

Last year in lift sector BRM Electronic Co. Ltd. which have founded for the manufacture of 81/28 approved two ways emergency communication system has presented its R&D completed new products in Eurasia Lift Fair.

In the lift sector BRM Electronic Co. Ltd. which have founded for the manufacture of 81/28 approved two ways emergency communication system has completed the R&D of its new products. The company’s Co-Founder and R&D Division Chief of Production, Tuba Pireci: “Our Company, which was founded in 2018, was aimed to fulfill the need of the lift sector’s 81/28 approved two sided emergency communication system. Besides our 81/28 approved two sided emergency communication system; IOT and Industry 4.0 compatible product tracking and malfunction tracking systems will be presented on CNR EXPO Yeşilköy on March 20-23, 2019.

 

The products we will present in the fair is there to provide advantages in terms of time, cost, work load, personnel and work follow-up. With our product and malfunction tracking system, we aim to improve the lift sector to a better position.” She also added that their products are qualified to fulfill the needs of the upcoming ‘Online Lift Tracking System’, which is planned by Ministry of Industry and Technology, and as BRM Electronic, they are aspiring to apply for this opportunity.

BRM products selling in Turkey aside, Pireci explained their presence in international markets, adding that their products are used in France, Sweden, Croatia and Tunisia. Informing that they are planning to allocate %30 of their production to export, Pireci said: “We have formed a dealer network with near 50 leading companies in the sector. With the special operation we have done with Argeset Electronic, we have standardized BRM inner cabin module in Argeset’s inner cabin operation panel systems. We also have a similar operation going on with Ametal and we are aiming to finish this operation by the time of the Eurasia Lift Fair.

 

Our new products, BRM 530N and BRM 530D models will be available by the month of March.

 

Along with our new products, we are providing our sector with many fresh features.

 

We lowered the cable count going from engine room to upper side of the cabin and pit bottom to 3. With this change, we prevented excessive cable usage while developing a system that can be integrated to even the old elevators.

 

With our digital screens, we utilized an easy-to-use system for installation and device warnings. One of our most important changes is the possibility of two lifts residing in one pit using just one BRM 530D model. Thus, we provide a cost efficient advantage with the need of one sim card instead of two for our customers.

 

In our new series of lift motherboard and communication module-added products, we designed a substructure that can track the malfunctions and statuses of lifts in scope of protocol that can be made with all motherboard manufacturers. In this context, we started the negotiations with our motherboard manufacturers. According to our plans, our software will be available to install by the month of April.

Detailed information for companies about our other product varieties, specifications of our products and dealers network will be present on www.brmelektronik.com

 

 

Rate this item
(0 votes)
Haber Servisi

Asansör Vizyon Haber Servisi

Leave a comment

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.

Most Read

Panoramic View

Panoramic View

Apr 01, 2018 Rate: 0.00

Turkey Lift Sector Report 2017

Turkey Lift Sector Report 2017

Apr 01, 2018 Rate: 0.00

Last Tweets

RT @IPEKUMUTDUNYASI: #DMDyibirlikteduyuralım çocuklarımız için mücadeleye devam @FOXTurkiye @FOXhaber @ShowTV @startv https://t.co/mXH8VO0o…
den/dan Instagram
Az önce bir fotoğraf paylaştı https://t.co/6S77FEfcNG
https://t.co/wBYsY4dQRc
Takip Et Asansor Vizyon on Twitter

Content Gallery

ARTI KASNAK COMPANY STARTED PRODUCTION OF CAPTORMAL PULLEYS (MC NYLON 6)

ONAYLIFT ASANSÖR COMPANY MOVED TO THE NEW PRODUCTION PLANT WITH THE AREA OF 10,000 SQ.M

MR. UMUT ERDAĞ OF MIKROLIFT LIFTS: "MIKROLIFT PRODUCTS INSPECTS 2/5TH OF THE LIFTS MANUFACTURED IN TURKEY”

2ND INTERNATIONAL “ASCEN.TEC”:  ON MAY, 22 – 24, 2020 THE EXHİBİTİON FOR ELEVATOR TECHNOLOGİES

INTENSIVE PREPARATION FOR EXHIBITION OF THE LIFT AND ESCALATOR EQUIPMENT AVRASYA ASANSÖR (EURASIA LIFT)

AT SEELIFT 2019 SYMPOSIUM, SAFETY AND MODERNIZATION WERE ON THE AGENDA

ARKEL MANUFACTURES 150 THOUSANDS OF ELECTRONIC CARDS AND MANUFACTURES DEVICES AND 5 THOUSANDS OF CONTROL PANELS PER YEAR

NAGEL ASANSÖR WILL TRIPLE ITS CAPACITY IN THE YEAR 2020

BUTKON ASANSÖR PRODUCES CABIN AND FLOOR BUTTON PANELS USING THE NEWEST HIGH-TECH EQUIPMENT